| Customization: | Available |
|---|---|
| CAS No.: | 9002-81-7 |
| Formula: | (CH2o)N |
|
Still deciding? Get samples of US$ 0/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Polyoxymethylene is used in a wide variety of sectors, including:
- Automotive industry: Used in the manufacture of components such as gears, fasteners, door locking systems and bearings.
- Consumer Electronics: Ideal for insulators, connectors and electronic device parts.
- Medical: Used in the production of medical devices such as insulin pens and inhalers, POM is an ideal plastic material for applications requiring high precision.
- Food Industry: Approved for food contact, it is used in milk pumps and coffee taps, thanks to its low absorption and chemical resistance properties.
- Furniture: Perfect for hardware, locks, sliding mechanisms and abrasion resistant components.
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| High viscosity | Injection molding, Extrusion molding | High stiffness High toughness |
H100 |
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| High viscosity | Extrusion molding (Rod, Sheet, Tube, Plate, Pipe etc) |
High toughness Reduced porosity and white mark |
F10 - 01 |
| F10 - 02 | |||
| Injection molding(Thick part) | High stiffness | F10 - 03H | |
| Medium high viscosity | General injection molding (Medium melt flow rate between F10 and F20) |
High toughness Suitable for thick parts |
F15 - 33 |
| Medium viscosity | General injection molding (Standard type) |
Standard and balanced property General injection molded parts |
F20 - 03 |
| Medium low viscosity | General injection molding (Medium melt flow rate between F20 and F30 |
General injection molded parts | F25 - 03 |
| High stiffness | F25 - 03H | ||
| Low viscosity | General injection molding (High melt flow rate) |
Multi-cavities parts Suitable for thin and small shaped parts |
F30 - 03 |
| Ultra low viscosity | General injection molding (Ultra high melt flow rate) |
Short cycle time Suitable for thin and small shaped parts |
F40 - 03 |
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| Glass fiber reinforced | General injection molding (Low content of glass fiber) |
High rigidity and hardness | FG2025K |
| General injection molding (Medium content of glass fiber) |
High stiffness and hardness | FG2015 | |
| General injection molding (High content of glass fiber) |
Highest stiffness,hardness and HDT Reduced thermal expansion and shrinkage |
FG2025 | |
| Milled glass fiber filled |
General injection molding | Minimized sink mark and warp Reduced anisotropy |
MF3025 |
| Glass bead filled | General injection molding | Dimensional accuracy Minimized sink mark and warp |
FB2030 |
| Talcum filled | General injection molding | Dimensional stability | TC3020 |
| Whisker filled | General injection molding | High stiffness Dimensional stability |
FT2020 |
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| Impact modified | General injection molding (Low contents of impact modifier) |
Good impact strength Noise reduction Good surface |
TE-21 |
| TE-22 | |||
| TE-23(FU2015) | |||
| General injection molding (Medium contents of impact modifier) |
High impact strength Standard impact modified grade |
TE-24(FU2020) | |
| TE-25(FU2025) | |||
| General injection molding (High contents of impact modifier) |
Ultra high impact strength Flexibility |
TE-24S |
| Classification | Processing | Characteristics | Grade | |
|---|---|---|---|---|
| Natural color | Medium viscosity | General injection molding | UV / light resistance(various colors) | F20-52 |
| Medium viscosity | General injection molding | UV / light resistance(various colors) Suitable for low gloss interior parts |
F20-52G | |
| Black | Medium viscosity | General injection molding | Suitable for interior and exterior parts | F20-51 |
| Medium viscosity | General injection molding | Weather and UV / light resistance (filled with Carbon Black) Suitable for interior and exterior parts High impact strength |
F20-51U |
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| PTFE | General injection molding (Low contents) |
High friction & wear resistance High PV limit value |
FL2020 |
| Silicone | General injection molding (Low contents) |
High friction & wear resistance High PV limit value |
TS-22H |
| General injection molding (High contents) |
Highest friction & wear resistance Highest PV limit value |
TS-25H | |
| General injection molding (High contents) |
Highest friction & wear resistance Suitable for delamination free and complicated parts |
TS-25A | |
| MoS2 | General injection molding (Medium viscosity grade) |
Low specific wear rate in condition of high load, low speed and against metal Suitable for bearing, bush parts |
FM2020 |
| FM2520S | |||
| Special Lubricant | General injection molding (Medium viscosity grade) |
High friction and wear resistance Noise reduction Silicone free |
NX-20 |
| General injection molding (High viscosity grade) |
High friction and wear resistance Noise reduction |
TX-11H | |
| General injection molding (Low viscosity grade) |
TX-31 |
| Classification | Processing | Characteristics | Grade |
|---|---|---|---|
| Conductive | General injection molding (Conductive carbon black filled) |
Conductive General type |
ET-20S |
| General injection molding (Conductive carbon black filled) |
Conductive Improved fuel resistance and toughness |
ET-20A | |
| General injection molding (Carbon black and carbon fiber reinforced) |
Conductive High stiffness and high creep strength |
FA-20 |
| Classification | Processing | Characteristics | Grade | |
|---|---|---|---|---|
| Standard | High viscosity | General injection molding | Low formaldehyde gas emission General injection molding |
F10-03H LOF |
| Medium viscosity | General injection molding | F20-03 LOF | ||
| Medium high viscosity | General injection molding | F25-03 LOF | ||
| Low viscosity | General injection molding | F30-03 LOF | ||
| UV & Weather resistance | Standard | General injection molding | Low formaldehyde gas emission UV / light resistance(various color) For interior parts |
F20-52 LOF |
| Impact modified | Standard | General injection molding | High impact strength Low formaldehyde gas emission |
FU2020 LOF2 |
| Glass fiber reinforced | Standard | General injection molding | High content of glass fiber Low formaldehyde gas emission |
FG2025 LOF |
The following questions and answers can help you learn more about us:
a. What kind of company are we?
Hebei Chijiang Import and Export Co., Ltd. Is a new type of company integrating production and trade.
b. Where is the port of export?
Our main ports are Shanghai,Tianjin, and Qingdao ports
c. Whether the product is single?
In fact, for each chemical raw material, we have different grades and corresponding prices, and we have a very detailed product catalog, if you are interested in our products, we can give you a detailed introduction.
d. Why should I choose your company?
For this question, I WANT to know that what's your expectation about price, quality, the factory, and last but not least, about the sales person you are talking to. /deadly, if all things are right, or at least 80% are right,you will know which one is the right one.
){kind=link}