Cold Water Instant High Viscosity High Transparent PVA 2488 Powder PVA Glue Spray Polyvinyl Alcohol PVA

• Customization: Available
• CAS No.: 9002-89-5
• Formula: C16h28o5
• Model NO.: PVA
• EINECS: 209-183-3
• Classification: Aromatic Alcohol
• Appearance: White Flocculent, Flaky or Powdered Solid
• Delivery Time: 7-15 Working Days
• Customized: Accepted
• Specifications: 2699 2488 1788 2499 2488 2088
• Mesh: 80-160
• Colors: Milky/Transparent/Light Yellow
• Content: 20~99 (%)
• pH Value Range: 3 ~ 9
• Storage: Cool Dry Places
• Water Soluble: Dissolve in Water
• Purposes: Adhesive, Emulsifier, Dispersant, Building Paint
• Other Names: Polyvinylalcohol, Ainylalcohol Polymer
• Transport Package: PP Bags
• Specification: 25 kg/bag
• Trademark: Chijiang
• Origin: China
• HS Code: 3905300000
• Production Capacity: 50000000tons/Year

Product Description

 

Product Description

PVA RESIN Cold water instant high viscosity high transparent PVA 2488 powder PVA glue spray

 

Product's main characteristics:

Polyvinyl alcohol resin series products are white solid, the appearance is divided into flocculent, granular, powder three kinds: non-toxic, tasteless, pollution-free, can be dissolved in 80-90 ºC water. The aqueous solution has good adhesion and film-forming properties. Resistant to most organic solvents such as oils, lubricants and hydrocarbons; It has the chemical properties of esterification, etherification and acetalization of long chain polyols.

 

 

Detailed Photos

APPLICATION  

1. Warp sizing agent. For warp sizing or fabric finishing. 

2. Paper processing. PVA has strong adhesive force and forms a tough film. It can be used to replace starch and casein or be used in combination with them as a color carrier for coated paper, or as a sizing agent to apply surface sizing to copperplate paper, wear-resistant paper, blueprint base paper, kraft paper, etc. This can enhance the paper's wear resistance, folding endurance, tear resistance, and improve its glossiness, smoothness, and printability. 

3. Adhesive. A series of adhesives made mainly from PVA have good adhesive force on paper, cloth and wood. Some inorganic substances, such as clay, bentonite, alumina and titanium dioxide, can be added to increase the bonding strength. 

4. Film. The film made of PVA has good transparency, high tensile and tear strength, good moisture permeability and heat insulation, is resistant to oil and organic solvents, and does not generate static electricity. Therefore, it is suitable for packaging textiles and food. 

5. Acetal derivatives. PVA reacts with formaldehyde, acetaldehyde, butyraldehyde or other aldehydes in the presence of an acid catalyst to form acetalized PVA derivatives, which further improve the water resistance and adhesiveness of polyvinyl alcohol. 

6. Fiber raw materials. Viscose rayon fibers are produced by washing PVA with water, dissolving it, spinning it, and then formaldehyde treatment. PVA can also be used to develop and manufacture high-strength and high-modulus PVA fibers to replace asbestos. 

7. Dry-mixed mortar. PVA has excellent film-forming properties. When used in combination with cellulose ether-based water-retaining agents, they can enhance the flexibility and water retention of cement mortar and gypsum building materials, and improve the adhesion of mortar.

 

main PVA products

1. Self-produced cold soluble PVA powder :PVA0588 1788 2488 2688BP-17 BP-24(20-300 mesh) Anhui Wei, Sichuan Wei, Shanghai Sinopec, Changchun, Taiwan.


2. Hot-melt PVA PVA powder \ flocculent particles piece \ : PVA038805881788248817992099239924992699BP - 17 bp - 24 WanWei sinopec, sichuan, Shanghai, Taiwan changchun.

 

    

Product Parameters

Contact us now to customize your specifications

Product Parameters of PVA
 

Standard Grades
Hydrolyzed	Item	Viscosity (mpa.s)	Alcoholysis (mol)	Volatile(%)	Sodium Acetate(%)	Ash(%)	PH
Fully	04-99(L)	3.0-4.5	98.0-100.0	7.0	2.5	0.7		5-7
	05-99(L)	4.0-6.0	98.0-100.0	7.0	2.5	0.7		5-7
	10-99(L)	9.0-14.0	98.0-100.0	7.0	2.5	0.7		5-7
	15-99(L)	20.0-26.0	98.0-100.0	7.0	2.5	0.7		5-7
	17-98(L)	20.0-26.0	97.0-99.0	7.0	2.5	0.7		5-7
	17-99(L)	20.0-26.0	98.0-100.0	7.0	2.5	0.7		5-7
	17-99(H)	20.0-26.0	98.5-100.0	9.0	2.5	3.0		5-7
	19-99(L)	26.0-32.0	98.0-100.0	7.0	2.5	0.7		5-7
	19-99(H)	26.0-34.0	98.5-100.0	9.0	2.5	0.7		5-7
	20-99(L)	32.0-40.0	98.0-100.0	7.0	2.5	0.7		5-7
	20-99(H)	34.0-42.0	98.5-100.0	9.0	2.5	0.7		5-7
	22-99(L)	40.0-48.0	98.0-100.0	7.0	2.5	0.7		5-7
	23-99(H)	42.0-55.0	98.5-100.0	9.0	2.5	3.0		5-7
	24-99(L)	48.0-60	98.0-100.0	7.0	2.5	0.7		5-7
	26-99(L)	60.0-75.0	98.0-100.0	7.0	2.5	3.0		5-7
	28-99(L)	75.0-90.0	98.0-100.0	7.0	2.5	0.7		5-7
Partially	04-88(L)	3.0-4.5	86.0-90.0	7.0	2.5	0.7		5-7
	05-88(L)	4.0-6.0	86.0-90.0	7.0	2.5	0.7		5-7
	17-80(L)	18.0-24.0	86.0-90.0	7.0	2.5	0.7		5-7
	17-88(L)	20.0-28.0	86.0-90.0	7.0	2.5	0.7		5-7
	20-88(L)	28.0-40.0	86.0-90.0	7.0	2.5	3.0		5-7
	24-88(L)	40.0-55.0	86.0-90.0	7.0	2.5	0.7		5-7
Intermediate	10-92(L)	8.0-13.0	90.0-94.0	7.0	2.5	0.7		5-7
	14-92(L)	13.0-18.0	90.0-94.0	7.0	3.5	0.7		5-7
	17-92(L)	20.0-30.0	90.0-94.0	7.0	4.5	0.7		5-7
	17-95(L)	20.0-30.0	94.0-96.0	7.0	5.5	0.7		5-7
	17-96(L)	20.0-30.0	94.0-98.0	7.0	6.5	0.7		5-7
	17-97(L)	21.0-31.0	96.0-98.0	7.0	7.5	0.7	5-7
Fine Particle Grades(S-Grade)
Item	Mesh size	Viscosity (mpa.s)	Alcoholysis (mol)	Volatile(%)	Sodium Acetate (%)	Ash(%)	PH
04-88 S80	80	3.0-4.5	86.0-90.0	7.0	2.5	0.7	5-7
17-99 S120	120	20.0-26.0	98.0-100.0	7.0	2.5	0.7	5-7
17-99 S80	80	20.0-26.0	98.0-100.0	7.0	2.5	0.7	5-7
17-99 S50	50	20.0-26.0	98.0-100.0	7.0	2.5	0.7	5-7
05-88 S80	80	4.0-6.0	86.0-90.0	7.0	2.5	0.7	5-7
17-80 S80	80	18.0-24.0	86.0-90.0	7.0	2.5	0.7	5-7
20-88 S80	80	28.0-40.0	86.0-90.0	7.0	2.5	3.0	5-7
24-88 S80	80	40.0-55.0	86.0-90.0	7.0	2.5	0.7	5-7
Fiber Grade
specification		17-99F(H)		17-99F(L)		26-99F(L)
Alcoholysis %(mol)		99.8-100		99.8-100		99.8-100
Viscosity % ≤		9.0		7.0		7.0
Residual Acetic Acid % ≤		0.20		0.20		0.20
Sodium HAcetate % ≤		7		2.5		2.5
Purity % ≥		84.7		92.0		92.0
Transparency % ≥		90.0		90.0		90.0
Coloring Degree % ≥		84.0		86.0		86.0
Swelling Capacity %		190±15		145±15		145±15
Average Degree of Polumerization		1750-1900		1750-1900		2450-2650
Molecular Weight		77000-83600		77000-83600		107800-116600
Appearance		White flocculent		White flake		White flake
Customized Grade (Products are customized to meet special requirements for companies that have special applicationor that require to reach special performance. )
The following speciation item can be improved or modified .		Viscosity (mpa.s)	Alcoholysis (mol)	Volatile(%)	Sodium Acetate (%)	Ash(%)	PH

Usage method
1. Polyvinyl alcohol resin series products can be dissolved in hot water below 95ºC, but due to the difference in polymerization degree, alcoholysis degree, alcohol hydrolysis methods and other different in the dissolution time, temperature has a certain difference, so in the use of different brands of polyvinyl alcohol resin, the dissolution method and time need to explore. When dissolved, the product can be slowly added to the cold water of about 20 ° C while stirring to fully swell, disperse and escape volatile materials (do not add the product to the water above 40 ° C for direct dissolution, to avoid the phenomenon of coating and skin dissolution), and then heat up to about 95 ° C to accelerate the dissolution, and hold heat for 2~2.5 hours. Until the solution no longer contains small particles, and then through 28 mesh stainless steel filter impurities, can be used.
2. Stirring speed 70~100 RPM, when heating, can be used jacket, water bath and other indirect heating, can also be used direct heating of water steam: however, can not use direct heating of open flame, so as to avoid local overheating and decomposition, if there is no mixer, steam can be used to blow into the method of tangential direction to dissolve. The aqueous solution concentration of polyvinyl alcohol resin series products is generally below 12~14%; The aqueous solution concentration of low alcoholysis polyvinyl alcohol resin products can generally be about 20%.
3. Test whether the product is completely dissolved: take out a small amount of solution, add 1 to 2 drops of iodine solution, if there is a blue granular transparent body, indicating that it has not been completely dissolved, such as the color can be evenly spread, indicating that it has been completely dissolved.

Tips:
Color classification has nothing to do with the product, just for the convenience of purchasing models and releasing products! Polyvinyl alcohol is white powder or granular or flocculent before dissolution, according to the weight model shipped, completely dissolved is a transparent solution! 88 Series model powder can be dissolved in cold water! 99 series models and particle floc need to be heated to dissolve,99 model powder also need to be heated, powder undissolved faster!

Viscosity 0388 0588 1788 2488 2688 Viscosity from low to high!

Viscosity 1792 0599 1799 2399 2499 2699 Viscosity from low to high, only 88 model powder can be dissolved in cold water!

The cold soluble type has 0588 1788 2488 2688 powder (80-160 mesh, 100 mesh is recommended for direct water dissolution), the viscosity is from low to high, and the direct dry powder mixing type is recommended for 120 mesh. The rest should be heated and dissolved!
Certification

 

 

 

 

Packaging & Shipping

Packaging:

1. Bags: 20kg  polyethylene or paper bags, moisture-proof and sturdy.
2. Bulk Bags: 500 kg or 1000 kg bulk bags, moisture-resistant and durable.
3. Sealed Containers: For maximum protection against moisture and contamination.

Transportation:

1. Shipping Containers: 20-foot or 40-foot containers for international shipments.
2. Truck Transport: Securely loaded trucks for domestic transportation.
3. Rail Transport: Bulk bags or sealed containers loaded onto rail cars.

Handling Precautions:

1. Avoid Moisture: Keep PVA resin dry to maintain quality.
2. Secure Loading: Ensure bags and containers are fastened to prevent shifting.
3. Temperature Control: Avoid extreme temperatures.
4. Safe Handling: Use proper equipment to prevent spillage.

Contact Us: Get in touch to start our collaboration today.

Company Profile

         Hebei Chijiang Import and Export Co., Ltd. is a professional, agile and international plastics chemical supplier, specialising in the plastics and its products industry for more than 10 years, with the most complete international supply chain of plastics raw materials. We offer high quality raw materials, the most agile information on the plastics chemical market and can match you with the most suitable raw material options. Our experience, flexibility and professionalism have LED us to a large number of customers. We have delivered a wide range of different plastic chemicals safely to more than 30 countries and have customers in all regions of the world.
        Chijiang′s tenet is: To survive on quality, to be credible and to strive for excellence, and at the same time, as always, adhering to the principle of "credibility first, customer first", always put the interests of customers in the first place, and provide the best products and the best quality service for every customer with all our heart. Chijiang is committed to creating more value and benefits for global users, and to building itself into a competitive first-class enterprise through continuous improvement.

Our Advantages

 

FAQ

Q1. Are you a factory or trading company?

A: We are factory with an integrated sales team, designers, and showroom. We provide comprehensive assistance to help buyers choose suitable products. All inquiries are responded to within 24 hours.

Q2. Can I get samples for testing?
A: Yes, we provide samples. Customers cover the initial shipping costs, which are reimbursed in our first cooperation.

Q3. How does your factory ensure quality control?
A: Our factory is ISO9001:2008, REACH, and FAMIQS certified, ensuring rigorous quality control. Each Batch of goods do SGS inspection before leaving our factory.

Q4. What's your Delivery Time?
A: Delivery typically takes 5 to 10 days after payment receipt. Larger orders are confirmed with our production department for prompt, quality-assured delivery.

Q5. What are your payment terms?
A: We accept L/C, T/T, Western Union, and Paypal. Alternative methods can be discussed.

Q6. Which documents do you provide?
A: Standard documents include Commercial Invoice, Price List, Packing List, COA, Origin Certificate, Quality/Quantity Certificate, Beneficiary's Certificate, MSDS, B/L, and others upon request.
 

Additional Information:

• Packing: Usually 20 kg PP bag ; custom packing available.
• Reply Time: Sales managers respond within 24 hours.
• Product Validity: Typically 2 years.
• Sample Requests: Free samples upon agreed pricing, with shipping costs upfront.
• Loading Port: Primarily SHANGHAI port.
• Transport Modes: Sea and train primarily used.
• Bulk Orders: Discounts available for large quantities.

Contact us now to discuss and place your order for premium  PVA resin. (Professional Techinical Engineers Online!!!)

 

Warmly welcome friends to inquire about our products. We are looking forward to establishing a mutually beneficial business relationship with you!